BLT640-HIGH-POWER-LASER-CUTTING-HEAD

Your Best Choice High Power Fiber Laser Head 

_

Cutting Carbon steel 60mm, Stainless steel 70mm, Aluminum Alloy 50mm, Brass 40mm, Copper 20mm

The BLT series high-power intelligent fiber laser cutting head is a full-featured EtherCAD fiber laser head for the sheet metal cutting industry.
Presented by Shanghai BOCI Company, a subsidiary corporation of Shanghai BOCU group, which offers Cypcut fiber laser cutting control system.
It is easy to install, easy to debug, excellent in performance, and complete with sensors ensure it stable laser cutting with high power up to 20kw. if you are looking for a high-power laser cutting head, BOCI will be your right choice.

Collimating Focus, Rapidly Response, Small Opening Angle, Guarantee High Power Laser Cutting up to 20KW.

FIBER-LASER-HEAD-BLT641-colimator-focusing
10kw-fiber-laser-cutting-head

12 Sets Smart Sensors, Monitoring and Warning If Any Wrong, Everything is under Control.

Plug-in Modular Design, 1 Minute to Replace the Lens, No Any Return Repair Issue, Easy Maintenance.

15kw-fiber-laser-head-BLT641
Fiber-laser-cutting-head-BLT420
fiber-laser-head-head-blt420

Double Sealing Structure, IP65 Level Airtightness,No Any Dust, Stable High Power Cutting 

 Collimating Focus Fast Respond Instead of Lens Slowly Moving
Making Processing More Efficient

fiber-laser-cutting
blt420-fiber-laser-head

Perfectly Integrated Laser Head with the Control Software, Monitoring the Working Status, Everything on Your Hand.

8kw-20kw Industrial Fiber Laser Head

_
PARAMETER
MODEL 8KW FIBER LASER HEAD BLT420 15KW FIBER LASER CUTTING HEAD BLT640 20KW FIBER LASER CUTTING HEAD BLT641H
LASER POWER 8KW 10-15KW 20KW
WaveLength 1030-1090nm 1030-1091nm 1030-1090nm
Control system FSCUT2000S/8000 FSCUT8000 FSCUT8000
Pressure 25BAR 30BAR 30BAR
Fiber Connector QBH/QD QBH/QD QBH/QD/Q+
Control unit BCS210E BCS210E BCS210E
Interface type POE LAN cable POE LAN cable POE LAN cable
Focus 150MM/200MM 200MM 200MM
Magnification of spot X2.1 X2.1 X2.1
Power rating 8KW 15KW 15KW
Focal range From -35mm to +35 From -50mm to +50 From -50mm to +50
Working Temperature 15-55℃ 15-55℃ 15-55℃
Dimension 427*152 472*181 472*181
Weight 5.5KG 11KGS 11KGS
ADVANTAGES

Intelligent Monitoring, monitoring protective mirror temperature, and closed-loop control of assistant cutting gas, ensure cutting thick steel stable for a long time.
Automatic Focusing, focusing speed reach 200mm/s, Rapid focus
Whole-body water-cooling design, High cooling performance, reduce the heat generated in laser cutting, high stability even 20kw laser cutting.
High airtightness, IP67 high airtightness design of the whole laser cutting head, with extra cover panel protection for the optical lens area, the sealing level is higher than ever.
Easy to replace lens, all lenses of the fiber laser head can be pull out from the front, which is convenient for you to replace quickly, with convenient maintenance

 

Monitoring Description

1. Monitor focusing lens status and detect lens pollution
2. Monitor focusing lens environment temperature
3. Monitor laser head cavity temperature to avoid thermal effect to the optical device
4. Monitor cavity humidity and avoid dewing
5. Monitor cavity pressure and cavity leak-proofness
6. Monitor protective window temperature to guarantee cutting quality
7. Monitor output gas flow in production and avoid gas pressure fluctuation damaging cutting edge quality
8. Capacitance Monitor distance from workpiece and nozzle
9. Monitor ambient temperature around sensor head
10. Monitor gas temperature to avoid heated gas affecting cutting edge quality

 

BLT641H EXTRA ADVANTAGES:

Intelligent Piercing: real-time detection of Piercing status, Once full penetration, move for the next step, otherwise, Keep Piercing. It will let you know penetration without any delay. Improving production efficiency.

Cutting Monitoring: There is a position where the returned slag has not been cut through during the cutting, and the re-cutting can realize unattended and stable cutting.

Astigmatism Detection: Astigmatism detection is added between the upper protective mirror and QBH connector of the laser source, which will warn if the protective mirror or optical fiber protective cap is contaminated with dirty dust, This will effectively avoid serious damage to the cutting head or optical fiber cable caused by continuous laser light emission.

VIDEO
maintain metal laser cutting machine

Never Want You to Miss Raytools WSX OSPRI Fiber Laser Head

_
RAYTOOLS-FIBER-LASER-HEAD-BM109

Raytools Fiber Laser Head, Model BM109, which is designed in Switzerland and Made in China, is a very popular laser cutting head for 1000w-1500w laser cutting machines, Auto Focus, stable cutting carbon steel up to 16mm, and stainless steel 5mm.

OSPRI-FIBER-LASER-HEAD

OSPRI fiber laser head LC40s is a 3kw laser cutting head for cutting 20mm carbon steel maximum, collimating focus technology similar to the Germany Precitec laser head, advanced cutting, and easy maintenance.

precitec-laser-head-pro-cutter-6kw

World-leading Precitec laser cutting technology was born for sheet metal laser cutting capacity on carbon steel up to 25mm, Various monitoring system status portable via WLAN, ensure stable laser cutting.

WSX-FIBER-laser-head-nc30

WSX fiber laser cutting head, China leading laser head manufacturer, widely used for laser cutting and welding, this laser head is Nc30, works with 3kw laser source, autofocus, stable running and reasonable price.

RAYTOOLS-FIBER-LASER-HEAD-BM111

Raytools fiber laser cutting model BM111, is an autofocus 3kw laser cutting head, it is reliable on cutting quality, equips with Yaskawa servo motor, rapid focus without any delay, easy cutting on steel.

RAYTOOLS-FIBER-LASER-CUTTING-HEAD-BM109

BM109 fiber laser cutting head, Raytools brand, no matter 1000w or 1500w Laser cutting machine, you can use it, Autofocus allow you to cut different thickness steel with the easy adjustment of the cutting parameter.

Send Inquiry

    gyc laser about us