PRO 3015 Fiber Laser Cutting Machine | 3kW & 6kW

PRO 3015 Fiber Laser | 3kW & 6kW

Bring production-grade laser cutting onto your floor.

A fully enclosed 5 x 10 ft fiber laser built for sheet-metal shops that need predictable output, a clear commissioning plan, and a US team coordinating delivery, installation and operator training.

US team coordinationUS deliveryInstallation supportOperator training
PRO 3015 enclosed 3000W fiber laser cutting machine

3kWEveryday production6kWHigher throughput
5 x 10 ftStandard 1500 x 3000 mm sheet format
Fully enclosedControlled cutting environment for the shop
Factory configuredMatched source, head, control and chiller
US-supportedPlanning through handover and training
The real buying decision

A laser should remove a bottleneck, not create a new project.

The machine matters. So do power planning, gas, extraction, delivery access, commissioning and the first production jobs. PRO 3015 is sold as a production launch, not a crate at your door.

01 / CAPACITY

Take control of lead times

Bring recurring sheet-metal work in-house and schedule cutting around your customers instead of a subcontractor’s queue.

02 / CONSISTENCY

Repeat the job, not the setup struggle

A matched laser package and guided handover help operators move from first cut to repeatable daily production.

03 / SUPPORT

Know who owns the next step

A US-facing team coordinates site readiness, delivery, installation support and training around the confirmed scope.

See PRO 3015 work

Watch the cut before you compare the quote.

See the enclosed platform, motion and cutting process. Then send your material mix and target parts so we can recommend 3kW or 6kW against the work you actually run.

1Share your partsMaterial, thickness, annual volume and drawings.
2Validate the processPower level, assist gas, cut expectations and cycle priorities.
3Plan the launchSite utilities, delivery access, commissioning and training.
What changes on your floor

From incoming sheet to a cut part your team can move downstream.

The value is not a long component list. It is a stable cutting cell that fits the way your shop quotes, schedules and produces.

01 / PROTECT

Enclosed cutting

A full enclosure helps contain the process and supports a cleaner, more controlled production environment.

02 / PRODUCE

5 x 10 ft sheet capacity

Process the common 1500 x 3000 mm format used across fabrication, enclosures, equipment and contract work.

03 / SCALE

Choose 3kW or 6kW

Match the investment to your material mix today while keeping throughput and growth in view.

Compact fully enclosed PRO 3015 fiber laser system

Built around production reality

A practical fit for shops moving beyond outsourced cutting.

PRO 3015 is aimed at operations that value dependable daily output and a manageable path into fiber laser production.

Job shopsQuote faster and keep recurring work under your roof.
OEM productionControl repeat parts, revisions and scheduling.
Cabinets & enclosuresCut panels, doors, brackets and internal components.
General fabricationHandle carbon steel, stainless and aluminum applications.
Choose by workload

3kW or 6kW: start with the parts, not the headline number.

Power affects thickness capability, piercing, speed, gas strategy, electrical demand and price. We size the system around your real mix instead of pushing the largest number.

Balanced entry point

PRO 3015 3kW

For shops focused on everyday thin-to-medium sheet work, investment control and a straightforward move into in-house cutting.

  • Strong fit for common fabrication work
  • Lower entry cost and utility demand
  • Practical choice when maximum speed is not the only goal
Not sure? Send 3 to 5 representative parts. We will review material, thickness, nesting, finish and volume, then explain which power level earns its place in your shop.

US customer delivery and handover support

Real shop handover: the relationship continues after delivery.
US delivery & service

A US team stays with the project.

Machine selection is only the first decision. Your team gets a clear path from application review to a production-ready handover.

01Application reviewParts, materials, thickness range, gas plan and production goals.
02Site-readiness planningPower, air, gas, extraction, foundation and delivery access reviewed before arrival.
03US delivery & installationDelivery coordination, setup and commissioning support for the confirmed scope.
04Operator trainingDaily operation, job setup, maintenance routines and safe working practices.
Right-sized specification

Enough detail to qualify the fit. Then we configure the machine.

Final values depend on laser power, source, cutting head, electrical standard and options. Your proposal will confirm the complete configuration.

Send parts, not a long RFQ.

A drawing or photo, material, thickness and monthly volume tell us more than a generic specification checklist.

Machine platformPRO 3015
Working area1500 x 3000 mm
Laser power3,000 W / 6,000 W
Machine formatFully enclosed
Primary processSheet metal cutting
Typical materialsCS / SS / Aluminum*
Control packageConfigured to application
Electrical standardConfirmed for your site

* Material capability and achievable thickness depend on laser power, assist gas, cut quality target and process setup. Final technical data is subject to the confirmed quotation.

Buyer questions

What shops ask before choosing PRO 3015

Is 3kW enough for my shop?

It can be a strong fit for common thin-to-medium sheet work and shops prioritizing investment control. The right answer depends on your material, thickness, gas choice, cut quality and required cycle time.

When does 6kW make sense?

Choose 6kW when higher throughput, faster processing on common gauges or additional thickness headroom materially affects your production economics.

Can you help us prepare the site?

Yes. The confirmed project includes site-readiness guidance covering electrical supply, compressed air, assist gas, extraction, foundation and delivery access.

Who handles delivery, installation and training in the United States?

A US-facing team coordinates the practical handoff. Exact delivery, installation and training scope is documented in the proposal for your location.

Can we send our own parts for review?

Yes. Send drawings, photos or representative files with material, thickness and production volume. We can use them to recommend power and configuration.

What is included in the final quote?

The proposal confirms the machine configuration, laser source, cutting head, control, chiller, options, delivery scope, service scope, lead time and site requirements.

Plan your first production day

Tell us what you cut. Get a configuration and US delivery plan.

Share a representative part, material range and target volume. We will respond with the recommended power, project scope, budgetary price and next step.

3kW vs 6kW recommendationApplication and part reviewUS delivery and service planBudgetary price and lead time

Request a PRO 3015 Application Review

Leave your contact details and a short description of the work. Our team will follow up to complete the review with you.